Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide Uživatelský manuál

Procházejte online nebo si stáhněte Uživatelský manuál pro Hardware Contemporary-control-systems EIPR Wired/Wireless VPN Router Installation Guide. Contemporary Control Systems EIPR Wired/Wireless VPN Router Installation Guide User Manual Uživatelská příručka

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 4
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 0
EIPR Series
Skorpion Wired and Wireless VPN Routers
Installation Guide
The EIPR Series provides routing between a wide-area-network (WAN) and a local-area-
network (LAN) which features a four-port 10/100 Mbps Ethernet switch. The two models
are identical except for their USB port functions. The EIPR-E can act as a Wi-Fi access
point with the connection of a Wi-Fi adapter. The EIPR-V does the same, but the USB port
can also support a cellular adapter for wireless WAN communication (in which case the
wired WAN port is automatically deactivated). The EIPR-V also adds virtual private
network (VPN) firmware and a real-time clock so that it can function as a VPN client.
Each port automatically negotiates with connected devices. Thus, the EIPR can provide
plug-and-play operation with no configuration unless required for advanced routing features
or when non-default operating parameters are required. In these cases, default behaviour
can be modified from a LAN port via its built-in web server located at 192.168.92.1. By
default, its WAN port is assigned an IP address via the built-in DHCP client. An internal
DHCP server assigns IP addresses to LAN-connected devices. Through its WAN port, the
built-in DNS forwarder passes DNS requests from a LAN host to a remote DNS server.
Powering. An internal half-wave rectifier allows sharing a common AC power source with other
half-wave devices. Voltage must deliver current commensurate with 9 VA power consumption.
Power conductors should be 1622 AWG (solid) or 1618 AWG (stranded). Common is
connected to 0 V. Chassis is isolated from 0 V. Inputs are reverse-polarity protected.
Zobrazit stránku 0
1 2 3 4

Shrnutí obsahu

Strany 1 - EIPR Series

EIPR Series Skorpion Wired and Wireless VPN Routers Installation Guide The EIPR Series provides routing between a wide-area-network (WAN) and a local-

Strany 2 - Specifications

Mechanical LED Indicators The “PWR” LED glows solid green when the unit is properly powered. Each Ethernet port has two LEDs: LED “L” glows soli

Strany 3

Wired Network Connections Auto-MDIX allows connections to other equipment with either crossover or straight-through cabling.Initial Access Setup.

Strany 4

Reset Switch. The Reset Switch (located just below the Power LED) will restore factory default settings including the IP address, netmask and

Komentáře k této Příručce

Žádné komentáře